Vertiup

Lift Description

• Painted steel frame.
• Removable LINAK control unit located on the supporting column.
• Column tube with carrying handle.
• Slingbar with 4 connections, the inclination is adjusted with a remote control (59 ° inclination).
• The lifting arm can move along the entire length of the column, it is possible lift the patiens from the ground.
• BASE SPREADING VIA ENGINE.
• Base with 4 pivoting and twin wheels, 2 rear with holding brake.
• RED MUSHROOM emergency button that blocks the flow of electricity.
• Mechanical emergency lowering system in case of power failure and an additional electronic emergency lowering system in case of remote control malfunction.

Dimensions

• Width: 68 cm.
• Length: 135 cm.
• Minimum height at the sling bar: 34 cm.
• Maximum height at the sling bar: 172 cm.
• Base height: 11.3 cm.
• Base width: from 53 cm (closed) to 126 cm (open).
• Front Wheels Ø: 10 cm (4”).
• Rear Wheels Ø: 12.5 cm (5”).
• Weight: 83 Kg.
• Weight capacity: 250 Kg.

Sling Description

The STANDARD SLING WITH HEAD SUPPORT is made of mesh and it is associated with a lift for moving patients. Its design allows transfers of patients who are in a sitting or lying position. All our lifts are generally supplied with this sling. In the case of specific requests, the standard sling will be replaced with the model you requested. To ensure maximum safety, the sling should be replaced every 3 years.

Data Sheet

	Lift
	Sling

CE Certificate

	Lift: UE 2017/745
	Sling: UE 2017/745